The SFU017 multi-cylinder dust filter is a new generation of textile dust filter equipment. Compared with other dust filters, it has the characteristics of simple structure, low price, low failure rate and good filtering effect.
(1) Make full use of the limited space in the structure of the equipment, increase the filtration area, and strive to reduce the floor space.
(2) Using high-efficiency filter materials to reduce the resistance loss of the filter material and reduce energy consumption.
(3) The integration and unitization of the equipment optimizes the connection pipeline between the internal equipment of the unit and reduces the local resistance loss. At the same time, the coupling parts and the vacuum suction pipe between the equipments in the unit do not need to be produced by the user, which is convenient for the user and simple to install. ,Convenient.
(4) While continuously improving the performance of the filtration equipment, pay attention to the appearance and surface coating of the equipment.
(5) Using only one set of geared motor and reciprocating transmission mechanism, the simple rotary motion is converted into a rotary and axial reciprocating composite motion. The whole machine mechanical and transmission structure becomes simple and light, and the entire transmission mechanism uses only one 0.25. KW geared motors eliminate complex electrical controls and are therefore extremely reliable, with low failure rates and easy maintenance.
(6) Each cylinder is provided with one long and one short nozzle, which are collectively rotated and reciprocated around the same axis. Compared with other multi-cylinder forms in which one long slit nozzle or a long slit long nozzle is used to rotate only without reciprocating each cylinder, the suction method requires a small amount of suction (only the latter one) About 50% of the method, therefore, in the case of the same amount of dust, the suction and cleaning power of the nozzle is significantly stronger than other dust filter equipment.
(7) The cycle of cleaning dust is shortened, the cleaning time is short, and the dust suction effect is obviously better than that of one tank, one tank or one row and one row, so that the resistance of the filter material is small and the treatment air volume is large.
(8) Compared with the dust filter equipment produced by other companies, the SFU017 multi-cylinder dust filter has a mesh plate support on the back of the filter material. Although the manufacturing cost is high, the filter material does not bulge during operation to ensure the dust collecting nozzle. Attached to the filter material, the vacuum effect is good.
(9) Insert type filter material stencil, it is convenient and quick to replace the filter material.